Bandit
71
Copyright 5/18
MODEL 12XP/990
MAINTENANCE
MANUAL YOKE LIFT PROCEDURE
(FOR MACHINES WITHOUT HYDRAULIC YOKE LIFT)
1. Follow all pre-maintenance shut down procedures.
2. Make sure the machine hitch is securely coupled and locked to a tow vehicle.
3. Remove the yoke springs.
4. Remove the tongue jack and secure the jack to the yoke lifting mount as shown below. Must use a
tongue jack with a foot pad.
5. Crank the jack to raise the yoke and top wheel.
6.
Do Not rely on the hand jack to hold the yoke and top wheel up.
7. Install the yoke lock pin completely and securely to help keep the top feedwheel in the raised position.
8. Crank the jack to lower the yoke and top wheel so the weight is on the yoke lock pin and not the jack.
9. Block and chain the top wheel up before doing any work inside throat
10. After the maintenance is complete, reverse the steps before putting the chipper back to work.
Slide Box Style Yoke
Before attempting any type of maintenance, disengage clutch, wait for the disc/drum to come to a complete
stop, turn off engine, remove the ignition key, make sure the ignition key is in your possession, install the
disc/drum lock pin, and disconnect the battery.
DANGER
!
Pivot Style Yoke
Summary of Contents for INTIMIDATOR 12XP/990
