Bandit
Copyright 1/07
PAGE 1
MODEL 3400T
LUBRICATION & COOLANT
1) Engine:
Follow original equipment manufacturers requirements for both changing oils and filters, refer to engine
manual specifications.
2) Engine Coolant:
Refer to engine manufacturers manual specifications.
3) Tracks:
Follow track manufacturer’s requirements for specific track lubricating procedures.
4) Hydraulic Reservoir Tank:
Completely change hydraulic oil, suction screen(s), and flush the tank annually.
Change hydraulic oil filter AFTER
FIRST
10 HOURS OF OPERATION. Then change hydraulic oil filter(s) every
00 hours or months thereafter. Maintain hydraulic oil level 7/8 full. See hydraulic oil requirements below.
Check hydraulic oil level in tank daily.
5) Hydraulic Fluid Requirements:
See pages 31 - 32 for hydraulic fluid requirements.
6) Hydrostatic Pump:
Change high pressure filter AFTER
FIRST
50 HOURS OF OPERATION. Then change high
pressure filter every 500 hours or 3 months thereafter.
7) Bottom Pivot Bushings:
Grease bottom pivot bushings daily. Use one (1) or two (2) shots of EP-2 Lithium type
grease. Wipe off excess grease.
Excessive grease will attract dirt.
8) Upper Frame Pivot Bushings:
Grease upper frame pivot bushings weekly. Use one (1) or two (2) shots of EP-2
Lithium type grease. Wipe off excess grease.
Excessive grease will attract dirt.
9) Cylinder Lug Pins:
Grease cylinder lug pins weekly. Use one (1) or two (2) shots of EP-2 Lithium type grease.
Wipe off excess grease.
Excessive grease will attract dirt.
10) “Bandit” Lever Throttle Cable (if equipped):
If the machine is equipped with a “Bandit” lever throttle
system, lubricate inner throttle cable and cable ends with a cable lube or SAE 10W/30 type oil every month.
Replace throttle cable if it doesn’t operate smoothly
.
11) Grading Blade Pivot Bushings (if equipped):
Grease Grease grading blade pivot bushings monthly. Use one
(1) or two (2) shots of EP-2 Lithium type grease. Wipe off excess grease.
Excessive grease will attract dirt.
LUBRICATION & COOLANT
