Bandit
Copyright 1/07
PAGE 0
MODEL 3400T
For optimum performance, the stump should be cut with the portion of the cutter wheel shown below.
NEVER
UNDERCUT THE STUMP
. Undercutting the stump may cause severe kickback, vibration and component
damage.
NEVER CUT THE STUMP FROM THE TOP
. The cutter wheel will throw debris up and toward the
operator, instead of down and under the machine.
CUTTING AREA
DANGER
DO NOT ENGAGE OR DISENGAGE DRIVE BELTS
AT A HIGH ENGINE SPEED
. Damage to belts and
machine will occur.
At low engine RPM cutter wheel swing speed control
needs to be closed for cutter head to swing. Turn
clockwise to close.
Turn off engine.
Allow cutter wheel to come to a complete stop before
inspecting.
Before hauling, install the upper frame lock pin.
MACHINE OPERATION (cont.)
MACHINE OPERATION
