20
HV DISPLAYS
Any B&G HVision display (HV display) connected to the NMEA 2000
®
network can be configured
using the Triton Edge web interface.
¼
Note:
The
HV displays
menu is only visible when one or more HV displays is connected.
G
A
B
C
D
E
F
A
Name
—Select in the field to edit the name of a display. If you have several HV displays on
the network, renaming them according to their location might help you identify them for
easy configuration.
B
Display group
—Assign the display to a display group, to change settings for that group of
displays simultaneously.
C
Backlight
—Adjust the backlight on the selected display.
D
Mode
—Set the contexts for the data displayed, for example, display a single data type
continuously, or display different data types depending on whether you are sailing upwind
or downwind.
E
Display type—The animated green light on the left shows the display is being configured.
At the same time, the corresponding unit on the vessel will flash to help you identify the HV
display being adjusted.
F
1st value, 2nd value
—Select the data type(s) to display from the list(s) in this group.
¼
Note:
The options visible here are determined by the
Mode
setting.
G
Oscillation time
—Sets the duration, in seconds, a data type is displayed before switching to
a different data type.
¼
Note:
Not all modes allow oscillation.
Summary of Contents for Triton Edge
Page 1: ...www bandg com TRITON EDGE QUICK START GUIDE ENGLISH ...
Page 23: ...23 ...
