9
SETUP GUIDE
The
Setup guide
opens automatically following the onboarding sequence. Follow the prompts
and complete the tasks in the order they are presented. Some data-entry and source selection
tasks are able to be completed on your vessel at the dock (
A
). Tasks listed under
On the water
(
B
) require you to maneuver the vessel at sea.
To return to the setup guide from a different screen, select
Setup guide
(
1
). To start a task, select
it (
2
) in the setup guide.
To remove a task from the setup guide, select the more icon then
Dismiss
.
B
A
1
2
¼
Note:
The setup guide disappears from the main menu when all tasks have been completed
or dismissed. All tasks can be reopened and adjusted later.
Tasks at the dock
Secure your device
Protect your settings with a PIN. To revisit this task later, access it under
General > Security > Secure your device
.
Add your boat details
Enter your vessel’s name, type, model, and dimensions. To revisit this task later, access it under
General > My vessel > Add your boat details
.
Select measured sources
Select the configurations and core sensors to be used by the Triton Edge for boat speed and
wind. (This should be performed before running an Auto source selection.) To revisit this task
later, access it under
General > System information > Sources
.
Review source selection
If your vessel has an instrument system with more than one sensor for a data category,
you can swap which sensor is used. To revisit this task later, access it under
General >
System information > Sources
. The
Auto source selection
wizard is also found under this
menu, and if used, will nominate sensors for you.
Summary of Contents for Triton Edge
Page 1: ...www bandg com TRITON EDGE QUICK START GUIDE ENGLISH ...
Page 23: ...23 ...
