10
Review sailing data
Lists key data, and indicates the status of related data sources. A green status indicates a
reading is valid; a red status indicates that a reading isn’t valid. Navigate to
Sailing data
in the
main menu to review the readings at any time.
Review depth offset
Enter an offset so that the depth reading displays depth below keel or, if preferred,
depth measured from the water surface. To revisit this task later, access it under
Sailing data > Sensors > Depth
.
Review GPS offset
Enter the position of your GPS receiver relative to vessel’s bow to get accurate startline values. To
revisit this task later, access it under
Sailing data > Sensors > GPS > Operations
.
¼
Note:
Your vessel’s beam and length must be entered for GPS offset to work. To enter beam
and length, navigate to
General > My vessel > Boat dimensions
.
Connect to B&G cloud
Manage preferences for what is shared with B&G, and when. To revisit this setting later, access
Preferences
from the main menu.
Tasks on the water
Calibrate the boat speed
In a sea trial, follow the steps in the calibration wizard to calibrate your boat speed sensor. To
revisit this task later, access it under
Sailing data > Sensors > Boat speed > Input
.
Calibrate the compass
In a sea trial, follow the steps in the calibration wizard to calibrate your compass.To revisit this
task later, access it under
Sailing data > Sensors > Heading > Input
.
Calibrate the wind angle offset
In a sea trial, follow the steps in the calibration wizard to calibrate the
measured wind angle offset. To revisit this task later, access it under
Sailing data > Sensors > Wind angle > Operations
.
Summary of Contents for Triton Edge
Page 1: ...www bandg com TRITON EDGE QUICK START GUIDE ENGLISH ...
Page 23: ...23 ...
