| 69
Autopilot setup |
H5000 Operation Manual
Commissioning
Dockside
Rudder Feedback
Set the rudder feedback type. It is important that the relevant rudder feedback unit is fi rst
selected via source selection.
¼
Note:
Select External for network sources or Internal frequency for RF300 sensors.
Boat length
Set the length of the vessel. Press the
1º LEFT
key to return to the dockside menu.
Drive voltage
Select the drive voltage 12 or 24 Volts. Press the
1º PORT
key to return to the dockside
menu.
Rudder calibration
Make sure the rudder feedback unit is installed and aligned as per it’s installation manual. The
rudder calibration will set the correct relationship between the physical rudder movement
and the rudder angle readout.
Follow the rudder calibration procedure: