manualshive.com logo in svg

B&G H5000 Pilot, Operation Manual

Share
Download
B&G H5000 Pilot Operation Manual Download Page 65

| 65

System setup | 

H5000 Operation Manual

Simulate

Simulator mode sends simulated data to the display.

 

¼

Note: 

All other displays on the network will remain to display the current boat data and will 

not change to simulate mode.

 Warning:  

It is not advisable to enter simulator mode when using your 

instrument system as a navigation aid.

Restore defaults

Restore Defaults has the option to wipe all settings or partial settings out of the Graphic 
Display. Select the data from the list that you wish to delete.

 

¼

Note: 

This is not a network function. This will only reset and delete history on the display that 

‘Restore defaults’ is selected on.

Global reset

The global reset will reset all settings in all displays along with performing a network reset 
removing all source selection. 

 

¼

Note: 

After performing a global reset the Graphic Display will ask to do an auto source 

selection. 

Summary of Contents for H5000 Pilot






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands