BANDELIN SONOREX TECHNIK HA 40, Operating Manual, Page: 6 / 24

6 / 24
22676-004 en/2024-01
2 Safety
2.1 Using the device
The planing head holder makes it possible to hang planing heads or saw blades in a
SONOREX TECHNIK RM device. This way, they can be cleaned quickly and thoroughly with
ultrasound. What's more, the risk of injury is significantly reduced compared to manual
cleaning.
For cleaning, the planing heads are mounted with their shafts on guide rollers and rotated
evenly by a motor. The drive is provided via the so-called friction wheel principle. The
rotation optimally supports the ultrasonic cleaning process.
Existing RM ultrasound equipment can be retrofitted with a planing head holder. The
following device combinations are possible, depending on the device size:
Planing head holder HA40

SONOREX TECHNIK RM 40 device
Planing head holder HA 110

SONOREX TECHNIK RM 110 device
Planing head holder HA 112

SONOREX TECHNIK RM 112 device
Planing head holder HA 210

SONOREX TECHNIK RM 210 device
The focus of application is on ultrasonic cleaning; additional processes such as rinsing are
also permitted and depend on the design of the SONOREX TECHNIK RM device.
The device is controlled via rotary switches on the front. For the HA 40, the table operation
is recommended; the planing head holders HA 110 to HA 210 are intended as floor-standing
devices.
2.2 Keep out of reach of children
Children may not detect hazards emanating from the device. Therefore, keep the device
away from children.
Safety