12 / 24
22676-004 en/2024-01
Preparing for operation
4.3 Installation and connections
Remove transport aids (pallets, transport locks) completely.
4.3.1 Planing head holder HA 40
• Place the device over the cleaning tank so that it can be operated from the front using the
SONOREX TECHNIK RM device; see image.
• Check that the motor is switched off (timer to "0") and only then carry out the following:
• Connect the planing head holder to a 230 V~ 50/60 Hz earthed wall socket.
• Align the device horizontally with the height-adjustable feet. The guide rollers and the
friction roller must not touch the edge of the tank!
Position the holding axle in place. Finally, check the height setting! The axle must not rest
on the edge of the tank.
• Keep the device clean and dry.
2
1
3
4
5
6
1 Front frame (with control)
2 Rear frame
3 Hanger connector
4 Frame connectors
5 Holding axle
6 Screws, washers and nuts
Summary of Contents for SONOREX TECHNIK HA 40
Page 23: ...22676 004 en 2024 01 23 24...