![background image](http://html1.mh-extra.com/html/bandelin/sonorex-digitec/sonorex-digitec_user-instructions_3806835019.webp)
19 / 36
1566g GB/2019-02
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
Step 6:
Removing treated objects
After sonication, the objects are to be removed from the ultrasonic bath. Allowing them to remain
any longer in the bath
fl
uid may damage them.
Switch off the ultrasound.
Remove the basket or inset beaker from the tank and set down atop a level surface.
Caution
Depending upon the set temperature or the duration of sonication, the baskets and objects
may be hot!
After the cleaning processes, rinse the treated objects with water of at least drinking quality.
Visually review the sonication results.
Before the next sonication, verify the service life (see chapter 4.4.2) of the bath
fl
uid. Heed the
speci
fi
cations of the preparation manufacturer. If necessary, empty the oscillating tank.
Step 7:
Empty the oscillating tank
Layers of contamination on the tank bottom reduce the ultrasonic output.
The oscillating tank is to be emptied after a long period of use or sonication of heavily soiled
objects, see chapter 4.4.2.
Switch off ultrasound (key ON/OFF).
Pull the power plug.
Do not place the ultrasonic bath in the sink.
Empty the oscillating tank, to do this
- Ultrasonic baths with outlet
Place ball valve handle in direction of discharge to open outlet.
- Ultrasonic baths without outlet
Pour out tank contents over the (rear left) corner.
In doing so, avoid splashing the ultrasonic bath from below.
After emptying the oscillating tank, thoroughly rinse it. Rub dry with a
soft cloth.
For additional care instructions, see chapter 5.