![background image](http://html1.mh-extra.com/html/bandelin/sonorex-digitec/sonorex-digitec_user-instructions_3806835014.webp)
14 / 36
1566g GB/2019-02
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.2
Miscellaneous functions
- not applicable -
3.2.1 Degas
(
- in time area)
• For degassing (DEGAS) before sonication, switch on the DEGAS function. If necessary, select
required duration with the key time preselection. Then press the key Start/Stop for at least 2
sec.
Early switch-off through re-pressing the Start/Stop-key.
During degassing, the top green LED (
) is blinking in addition to the time lapse.
• Switch between ultrasound and degas: if the Start/Stop-key is pressed a long time with
ultrasound on, the ultrasound is
fi
rst turned off and then reactivated with the degas function after
about 2 sec.
3.2.2 Block/unblock continuous operation ( - in time area)
In order to avoid inadvertent switching on of continuous operation, continuous operation can be
blocked:
Pull the mains plug.
Press the key time preselection and simultaneously plug in the mains plug.
The yellow LED “1 min” lights up for con
fi
rmation.
The function is again unblocked in the same way. The green LED continuous operation ( ) lights
up for con
fi
rmation.
3.2.3 Remote
control
The ultrasonic baths SONOREX DIGITEC ...-RC are equipped with an infrared interface.
Detailed informations and notes are given in separate documentation of the software
WINSONIC DT (Order No.: 3059).
Notes:
• The remote control software WINSONIC DT is not part of the standard accessory.
• The remote control software WINSONIC DT can be installed on operating systems from
Windows 2000 upwards.
• A commercially available infrared adapter (RS-232, half-duplex) can be used for communication.
The user signs responsible for the necessary program-related implementation of such
communication, which is not supported by the manufacturer. The manufacturer only guarantees
proper functioning of the interface.
• Various additional functions like protocol logging data and storage processing enable a
comfortable use for process and quality control by PC.
• If required, an instruction set for the IR-interface can be ordered from the manufacturer free of
charge.
• The proper operation depends on the length of the connecting line and is only guaranteed up to
a length of 5 m, when using an extension cable.