![background image](http://html1.mh-extra.com/html/bandelin/sonorex-digitec/sonorex-digitec_user-instructions_3806835012.webp)
1 Key Ultrasonic bath ON/OFF
2 Key temperature preselection with temperature scale above
3 Key time preselection with time scale above
4 Key Start/Stop - ultrasound
At ultrasonic baths without heating, the key
temperature preselection and the scale is not present.
1
2
3
4
12 / 36
1566g GB/2019-02
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3 Operation
3.1
Operating elements
The ultrasound and the heating system are operated from the front:
3.1.1
Ultrasound
While switched on ultrasonic bath - key ON/OFF - the ultrasound is
activated with the key Start/Stop after preselection of the time.
Timed operation
• Setting via keypress
Time 1, 2, 3, 4, 5, 10, 15 or 30 minutes
- After pressing the key Start/Stop a running light shows optically the balance
time.
- After run off of selected time, the ultrasound stops automatically.
• By pressing early the key Start/Stop this will stops the ultrasound.
Continuous operation
• Setting via keypress
LED
illuminated
- After pressing the Start/Stop key the top (green) LED lights up constantly.
- Ultrasound is not switched of automatically,
to switch of press the Start/Stop key.
Notes
• For safety reasons the unit will be automatically switched off, if no key has been pressed longer
than 12 hours.
• While turned off, the ultrasonic bath may remain connected to the mains.
It can be disconnected from the mains by pulling the mains plug.