23 / 32
6366-006 GB/2020-09
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
6.4.2 Exchanging fuses
CAUTION!
Repair work may only be carried out by authorised, quali
fi
ed personnel or by the manufacturer.
The manufacturer assumes no liability for unauthorised interventions on the ultrasonic bath!
The mains plug must be pulled out before opening the ultrasonic bath!
There is a risk of electric shock from live parts in the ultrasonic bath!
Empty
ultrasonic bath.
Turn over ultrasonic bath.
Loosen the screws around the casing.
Carefully remove the base plate.
If required, carefully separate the electrical plug connections between the base plate with
generator circuit board and the casing with oscillating tank.
Exchanging
fuses:
- The fuses are located on the generator circuit board.
- After inspection, exchange only the defective fuses.
- Replacement fuses are located on the base plate.
Assembly in reverse order.
