11 / 32
6366-006 GB/2020-09
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
2 Preparation
Carefully unpack the ultrasonic bath and accessories and inspect them for completeness
or possible transportation damages. If any damages or defects are found, these are to be
immediately noti
fi
ed in writing to the transportation company and to the supplier.
Before startup, the ultrasonic bath is to be left to stand at its operating location for 2 hours so that
it may adapt to the ambient conditions.
2.1
Scope of delivery
1
Ultrasonic bath – see delivery note
1 Ball valve with hose, packaged separately with sealing tape and assembly instructions
1 User
instructions
2
Implant boxes IB 5 (# 3208)
compatible with 1 Box holder BT 5 (# 3296)
2 Implant boxes IB 6 (# 3219)
compatible with 1 Box holder BT 6 (# 3252)
1 Implant box IB 10 (# 3244)
compatible with 1 Box holder BT 10 (# 3254)
1
Implant box IB 18 (# 3227)
compatible with 1 Box holder BT 18 (# 3263)
1
Implant box IB 20 (# 3237)
compatible with 1 Utensil holder GH 14 (# 291)
1 Bottle (250 ml) TICKOPUR R 33 and
1
Foil test frame FT 14 (# 3084)
Additional accessories according to order – see delivery note
IMPORTANT!
All accessories are provided with non-sterile packing!
2.2
Set-up / assembly
• Place the ultrasonic bath atop a
fi
rm, level and dry surface. In doing so,
-
observe the maximum weight of the ultrasonic bath, including
fl
uid.
Net weight, see technical data chapter 1.4.
-
Do not block the air supply below the ultrasonic bath.
-
Guard against moisture and wetness – risk of electric shock.
• Install the ball valve, hose socket and hose, which are included in the delivery, pursuant to the
enclosed assembly instructions.
• The ultrasonic bath must be positioned in such a way that disconnection from the power supply
is easily possible.