Revision 2 December 2013
1.2 FASTENER RECOMMENDATIONS
FOR FITTING GARAGE DOORS
IMPORTANT INFORMATION ON FASTENERS
Coach bolts/screws supplied with this product are NOT suitable.
The installer must select and use fasteners appropriate to the material into which they are being fixed.
REFER TO DRAWINGS 2212 - S01E, S02E, S03E
IMPORTANT NOTES:
1. For installation to materials not covered in the above chart, the installer should seek expert advice from a qualified builder.
2. Minimum length of fastener does not exclude use of longer lengths. Decision must be made by fitter to ensure adequate strength.
3. If in doubt about the strength of the material seek specialist advice.
MATERIAL
FASTENER TYPE(S)
DIAMETER
OR TYPE
LENGTH OF FASTENER
(See Note)
New Solid Brick
Anchor Screws or Equivalent
M10
X
100mm
3/8”
X
60mm
New Solid Concrete
Anchor Screws or Equivalent
M10
X
100mm
3/8”
X
60mm
Heavy Gauge Steel
Hex Head Tek
14-20 X
22mm
Timber
Hex Head Tek
Type 17: 14-20 X
50mm
4
Series 1 Windrated Installation Instructions