![background image](http://html.mh-extra.com/html/bandd/controll-a-door-p/controll-a-door-p_instruction-manual_460062027.webp)
Parameters
Door status indicators
Door opener state
OPen leD (green)
ClOSe leD (red)
Beeper
Open
On
Close
On
Opening
Flashing
Closing
Flashing
Door travel stopped
Flashing
Flashing
Door obstructed when opening
Flashing
Door obstructed when closing
Flashing
Beeps while door is
moving
Opener overloaded
Alternating flashes
Alternating flashes
Door in open position with Auto-
Close mode selected
One second flashes
Mains power interrupted
Rapid flashes
Button
function
OPERATE
Opens/stops/closes the door
CODE SET
Codes a transmitter button for operate function
FORCE MARGIN SET & PLUS (+)
Increases the obstruction force margin setting
FORCE MARGIN SET & MINUS (-)
Decreases the obstruction force margin setting
FORCE MARGIN SET (then) LIMIT SET
Reloads the factory set default obstruction force margin setting
LIMIT SET (for 6 seconds)
Clears the door limits set positions. Limits then need to be reset
LIMIT SET (the power on) and hold
until all LEDs are off
Deletes control parameters excluding transmitter storage memory
CODE SET press and hold until DOOR
CODE LED starts flashing
Deletes all transmitter storage memory
LIMIT SET & CODE SET (the power on)
and hold until all LEDs are off
Deletes all control parameters and transmitter storage memory
Diamond PD
Power Drive
: Instruction Manual
© Copyright January 2008 B&D Doors
27
Controll-A-Door
®
P
Instruction Manual