![background image](http://html.mh-extra.com/html/bandd/controll-a-door-p/controll-a-door-p_instruction-manual_460062010.webp)
Attaching the C-Rail
Locate shaft into sprocket
Shaft
Trac
k b
rac
ket
(x2
)
fig. 07
fig. 06
MARKeR
DOOR
SHUTTle
IMPORTAnT nOTe:
Do not power up the
powerhead before assembling to the C-Rail.
Step 1 - Centre the Shuttle
Make sure the shuttle is near the MARKER, which is located
in the centre of C-Rail
(fig. 06)
.
Step 2 - Connect the Powerhead to the C-Rail
Locate and insert the powerhead’s shaft into the C-Rail’s
sprocket as shown in
(fig. 07)
.
Step 3 - Secure the C-Rail
Fix the two track brackets as shown in
(fig. 08)
. Fix with
the four screws supplied in accessory pack.
fig. 08
Controll-A-Door
®
P
Instruction Manual
10