B&C Technologies HP series, Installation & Operation Manual

Page: 4 / 38

The B&C HP line is the professional
fixed mount washer-extractor series of
machines from B&C Technologies. It is an
open pocket washer-extractor with a large
door opening for easy and quick loading
and unloading. It has been developed for
the on premise market, and is suitable for
commercial laundries, hotel and other
places where laundry might be processed
The design allows for top
performance at lowest possible operation
cost and investment. The flexible electronic
control center ensures that maximum
productivity is obtained.
The HP series utilizes high quality
material, such as 304 (18/8) stainless steel
in vital parts in contact with the wash
solution. It has a stainless steel cabinet for
long life with easily removable panels.
The key advantages of this series are
the simplicity of the microprocessor and the
electronic AC drive system, which utilizes
only one motor. The system allows for
washing and extraction at any speed and
mechanical action to suit any textile fiber
used today and tomorrow. The high speed
final extraction saves time and energy in the
finishing operation.
A single compartment supply
dispenser for powder and liquid detergents
is standard (five compartment optional) and
the machine is designed to accept the
connection of 8 additional external
chemical lines and pumps. Additional
chemical connections are available as an
option.
The HP series is also prepared to
accept the connection of water reuse
systems. These systems can be installed
separate or on top of the machine. They are
available in either single or dual tanks for
maximum savings of water up to 40%. The
tanks can be equipped with or without
steam or electrical heat depending on
installation and operation. The water reuse
system is programmable by the machines
electronic control center.
Customer Service
For technical assistance, call the following
number:
Phone: (850)-249-2222
FAX: (850) 249-2226
e-mail: techsupport@bandctech.com
Web: www.bandctech.com
Replacement Parts
In the event that literature or replacement
parts are required, contact the local
distributor of the equipment, or contact
B&C Technologies at the above phone
numbers/internet addresses.
Introduction
HP Series Washer-Extractors
3