B&C Technologies HE-110, Installation And Operation Manual

Page: 40 / 49

5.3 Wash Program Execution
5.3.1 Cycle Selection
Press the up or down key until the desired cycle number is showing on the display. Press the keys
just hard enough to activate them. Pressing harder will cause undue wear on the keypad. After
you arrive at the desired cycle, ensure the goods are loaded, and the door is closed. Then press
Start. If the door is not properly closed and locked, the display will read Door until the door is
properly closed and locked. After the door is closed, press start.
5.3.2 Cycle Execution
A cycle can be aborted at any time by pressing the stop key. The machine will enter the stop routine
after which the door may be unlocked (display reads done).
To display the temperature of the wash solution during a cycle, press the up key. To display the
cycle number currently in process, press the start key.
For more detailed instructions and programming, see the programming manual supplied with
your machine. A list of factory provided wash programs is also contained within the A or B
Computer Programming Manual.
36