Programming
Programming the EL-6 takes place on three
levels:
1. Programming motors (
Function
45)
Allows 15 different agitation profiles to be
created. For each profile, the clockwise rotation
time, the counterclockwise rotation time and
the pause time can be programmed. (Factory
defaults are shown on page 9).
2. Programming cycles (
Function
12)
Each grouping of steps creates a sequence of
events in which various functions can be
activated or deactivated (drain, cold fill, spin,
etc.). Going from one step to another requires
reaching a water level, temperature, or a time
value. There are five different programmable
cycle types: Prewash, Wash, Rinse, Spin and
Unroll (Shakeout). Each cycle can be assigned
a number between 1 and 99. (See the EL6
Stock Programs Listing for details on factory
settings).
3. Wash Programs
Creation
(
Function
27)
Consists of putting the various cycles as
programmed above together to form a
complete wash program. Up to 30 programs
can be stored, each with 15 cycles. (See the
EL6 Stock Programs Listing for details on
factory settings).
POWER
PROGRAM #
RUN?
EXECUTE CYCLE
END
n?
PROGRAM
CREATION
MOTOR
PROGRAMMING
CYCLE
PROGRAMMING
OPTIONS
START + RESET
NO
RESET
YES START
ACCESS CODE
ACCESS CODE
ACCESS CODE
ACCESS CODE
7
