B&B Electronics, Inc.
SPECTRE Configuration Manual
50
710-10001-02 Rev. 3.0
www.bb-elec.com
www.bb-europe.com
1.17. L2TP tunnel configuration
Select the
L2TP
item in the menu to configure an L2TP tunnel. L2TP is a protocol which
is used to create a secure connection between two LANs. Only one
L2TP
tunnel may be
created.
Item
Description
Mode
L2TP tunnel mode on the router side
L2TP server -
For a server, you must define the start and end
IP address range offered by the server
L2TP client
–
For a client, you must enter the IP address
of the server
Server IP Address
IP address of server
Client Start IP
Address
Start IP address in range, which is offered by server to clients
Client End IP
Address
End IP address in range, which is offered by server to clients
Local IP Address
IP address of the local side of the tunnel
Remote IP
Address
IP address of the remote side of the tunnel
Remote Subnet
Address of the network behind the remote side of the tunnel
Remote Subnet
Mask
The mask of the network behind the remote side of the tunnel
Username
Username for login to L2TP tunnel
Password
Password for login to L2TP tunnel
Table 35: L2TP tunnel configuration
Press the Apply button to apply changes.
Fig. 39: L2TP tunnel configuration
