Driver Software Installation
16
Chapter 3
Manual Documentation Number 3PCIoUx-1008
Using the Found New Hardware Wizard
Windows will detect the PCI card and start the
Found New Hardware
Wizard
to begin the driver installation. The following dialog box will appear:
Drive software (on CD-ROM) is provided with your MIport card. Do not
connect to Windows Update to search for software.
6.
Select
No, not at this time
and click
Next.
PCI Card Software Installation
Once the new hardware has been detected, the wizard will proceed to install
the software for the card. The following dialog box will appear:
7.
To begin the installation of the software for the PCI card, click
Install the software automatically.
Click
Next.
Windows will find the appropriate files on the CD, then display a
dialog box concerning Window Logo testing for Vista. This feature
of Vista simply indicates that these drivers have not yet undergone
the Microsoft testing procedure required to use the Windows Vista
Logo on the packaging. Diver compatibility is not affected.
8.
Click
Continue Anyway.
A dialog box will appear indicating the software installation is
proceeding.
9.
When the
Completing the Found New Hardware Wizard
dialog
appears, click
Finish.
Port Driver Installation
The Welcome to the Found New Hardware Wizard will appear again, indicating it has
detected a port on the PCI card. Repeat the steps above to install the port driver
software.
If the cared you are installing has more than one port, Windows Vista will find each
port in sequence and re-launch the
Found New Hardware Wizard
for each port.
Repeat the previous steps for each port.
Checking the Driver Installation
You may want to check to verify that the new B&B COM ports are now available.
1.
From the Widows Desktop, click
Start
→
Control Panel
→
System and Maintenance
→
Device Manager
2.
In the
Device Manager
, click
Multi-port serial adapters.
