B&B Electronics, Inc.
AirborneM2M™ User Manual
64
1/9/2014
Serial Port 2 Settings
URL
/Configuration/Serial Port 2 Settings
Description
Configures the serial port settings on the secondary serial port.
Field
CLI Command
Serial CLI Default Mode
serial-default-p2
Serial Port Bit Rate
bit-rate-p2
Parity
parity-p2
Data Bits
data-bits-p2
Stop Bits
stop-bit-p2
Flow Control
flow-p2
Serial Assert
serial-assert-p2
Input Buffer Flush Size
input-size-p2
Serial Escape Mode
esc-mode-serial-p2
Wireless LAN CLI Escape Mode
esc-mode-lan-p2
Escape String
esc-str-p2
Serial Interface Type
intf-type
Serial port 2 cannot run in RS-485 mode and will assume RS-422 mode even if it is set
to RS-485 mode. Serial port 2 cannot run half duplex and must have a 4 wire
connection.