B&B Electronics, Inc.
AirborneM2M™ User Manual
104
1/9/2014
Please note that as part of the FCC requirements for the use of the modular
approval, the installation of any antenna must require a professional installer.
This is to prevent any non-authorized antenna being used with the radio. There
are ways to support this requirement but the most popular is to utilize a non-
standard antenna connector, this designation includes the reverse polarity
versions of the most popular RF antenna types (SMA, TNC, etc.). For more
details please contact B&B Electronics.
The following documents are associated with this applications note:
FCC Part 15
– Radio Frequency Devices
FCC Public Notice
– DA-00-1407A1 (June 26
th
, 2000)
B&B Electronics recommends that during the integration of the radio, into the
customers system, that any design guidelines be followed. Please contact B&B
Electronics Technical Support if you have any concerns regarding the hardware
integration.
Contact B&B Electronics Technical support for a copy of the FCC and IC grant
certificates, the test reports and updated approved antenna list.
17.5 Regulatory Test Mode Support
The Airborne Device Server includes support for all FCC, IC and ETSI test
modes required to perform regulatory compliance testing on the module, please
contact B&B Electronics Technical Support for details on enabling and using
these modes.
