Installation and Operations Manual
— Model 400E Series
7
B&B ARMR
A Division of B&B Roadway and Security Solutions 0400E-9001 Rev J
Manual operation of the gate can be performed by lowering drive assembly,
disengaging actuator from lock pins (Model 450 Only) and manually pushing the
gate. An optional manual over ride system can be purchased at the time of order
to allow gate opening and closing without disengaging drive assembly.
Motor controller ramps up and down the movement of the gate to reduce wear and
shock on drive unit based on limit switch trip plate locations.
Minimal wiring, no hydraulic hoses to pull.
1.1.1
Gate Leaf
The gate leaf pickets are typically 1" square steel tubes spaced on 2.5" centers. The
standard gate height is 108 inches (9 feet or 2.75 meters) above grade but custom sizes
are available.
Figure 1 Model 400 Cantilever Gate