A351, A355
PNEUMATIC TOOL
www.BAND-IT-IDEX.com
Document # P35087 Rev. I
© Copyright
BAND-IT-IDEX, Inc. 2021
All rights reserved
Page 3 of 19
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Operating
Manual
DANGER
—Misuse of this tool may result in injury to personnel.
• Only use the equipment for its intended purpose, as described in this manual
▪
Please read this entire manual before unpacking, setting up or operating this device.
Pay attention to all danger and caution statements. Failure to do so could result in serious injury
to the operator or other personnel, or damage to the equipment.
CAUTION
▪
Protective eyewear should be worn when connecting and disconnecting the tool to compressed
air sources and during operation.
▪
Wear appropriate gloves for handling steel while operating this tool, applying stainless steel
clamps and removing scrap clamp tail.
▪
Clamp tensioning can be immediately stopped by releasing the tool trigger system.
▪
When applying clamps, care should be taken to ensure fingers and loose clothing are not in the
way of the clamp being applied.
▪
Never attempt to clamp objects which have a potential to burst, shatter or otherwise cause
bodily harm.
▪
Disconnect air supply prior to maintenance and disassembly of tool components.
▪
Liquids or lubricants should never be put into the air lines.
▪
Risk of pinch point:
Located at
tool head and interface
during tension cycle
It is the task of the employer to warn his or her staff of risks, to train them on prevention of
accidents, and to provide necessary safety equipment and devices for the operator’s safety.
Before starting to work with the device, the operator should check the features of the device
and learn all details of the device’s operation. The device should only be operated by staff
members who have read and understand the contents of this manual.
Safety Guidelines