![background image](http://html1.mh-extra.com/html/bamix/cordless/cordless_user-manual_4459212019.webp)
34
35
cordless
cordless
Technical data
(for power indications please see product overview)
Mechanical and
IEC 60335-2-14:2016+AMD1:2019
electrical safety
IEC 60335-1:2010+AMD1:2013, AMD2:2016
EN 60335-2-14:2006+A1:2008+A11:2012+ A12:2016
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019
+A2:2019+A15:2021
IEC 60335-2-29:2016+AMD1:2019
IEC 60335-1:2010+AMD1:2013+AMD2:2016
EN 60335-2-29:2004+A2:2010+A11:2018 used in conjunction with
EN 60335-1:2012+A11:2014+A13:2017+A1:2019 + A14:2019
+ A2:2019+A15:2021
EN 62233:2008
EN 55014-1:2017/A11:2020
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55014-2:1997/A1:2001/A2:2008
IEC 62133-2:2017
UN 38.3
Directives and standards
2014/35/EU
LVD
2014/30/EU
EMC
2011/65/EU
RoHS
2009/125/EG
Framework Directive
10/2011/EU
PIM
94/62/EG
Packing
2012/19/EU
WEEE
1935/2004 EG
FMC
Insulation
Double insulation
Switch
Safety switch with pulse contact
Intermittent operation
max. 5 minutes at a time
Materials
All parts are made from rust-free, odourless and tasteless
materials that are resistant to corrosive foodstuffs.
Test marks
www.tuev-sued.de/ps-zert
Food contact
We herewith certify that this product and its attachments
materials
and accessories conform to the European Commission
Regulation No. 10/2011 on food contact materials.
It complies to all relevant statutory limits.
Disposal
This product conforms to the European Directive 2012/19/EC
on waste electrical and electronic equipment – WEEE.
This Directive governs the disposal and recycling of such
equipment within the EU. For disposal instructions, please
contact your dealer or local authorities.
Manufacturer
ESGE AG, Hauptstrasse 21, CH-9517 Mettlen/Schweiz
Made in Switzerland
All information in this document is subject to change without
prior notice. The above information might vary from country
to country.
www.bamix.com
If you take a closer look at the attachments, you will see a re-
cess.
The drive shaft stub of the bamix
®
is equipped with a drive pin.
Always remove the battery before changing attachments. Push
the attachment as straight as possible onto the stub so that the
drive pin engages in the recess on the attachment. Please make
sure that the attachment is exactly parallel to the cutter guard
and properly aligned with the stub.
To remove the attachment, first remove the battery, then just
pull it from the stub. If the attachment cannot be easily pulled
off, loosen it by placing the bamix
®
in hot dish-washing water
and switching the appliance on briefly. Remove the battery
again and pull off the attachment. If necessary, lever it off with a
suitable implement (e.g. screwdriver).
Recess
Driving pin
Lock
Attachments, accessories and their operation
Detailed information on attachments and other accessories (not included in the
scope of delivery) as well as their use (chopping, mincing, puréeing, beating, fluffing,
stirring, mixing, slicing) can be found in the instructions for use FULL INSTRUCTION
MANUAL at www.bamix.com
Affixing and changing attachments
Risk of injury! There is a risk of injury from sharp edges/blades and
rotating parts on all attachments! Always keep hair, clothing, fingers
etc. away from the attachments when working. Always wait until the
rotating parts have come to a complete stop before touching them!
This warning applies to all attachments!
Summary of Contents for cordless
Page 21: ...cordless Notes...