baltur TBML 80 MC, Instruction Manual For Installation, Use And Maintenance

Page: 63 / 104

BURNER CONNECTION TO THE
BOILER
REFRACTORY LINING
If a lining is necessary around the combustion head of the burner, it
must comply with the instructions in accordance with the boiler manu -
facturer's instructions.
The refractory lining on the hatch of the combustion chamber protects
the boiler hatch from the high temperatures that develop in the combu -
stion chamber.
It also abbreviates the time necessary to reach the proper temperature,
optimizing combustion.
We recommend using good quality refractory material which can resist
temperatures in excess of 1500°C (42/44% alumina).
Recommendations for correct installation of refractory material:
• Refractory material lining should be applied only to boiler door.
• Application in other parts of the combustion chamber would redu -
ce the thermal exchange with the outside, causing deterioration of
the boiler combustion chamber.
• Application of excess refractory material will also cause a
significant reduction in the volume of the combustion chamber,
preventing optimal combustion due to insufficient volume.
DANGER / ATTENTION
Seal the space between the burner sleeve and the hold on the
refractory material inside the boiler door completely with suitable
material.
IBR_N_MC_ME_Rivestimento
A
B
C
A Combustion head
B Minimum opening 20 mm on diameter
C Refractory material
11 / 50
0006160331_202310
ENGLISH