baltur TBML 450LX ME, Instruction Manual For Installation, Use And Maintenance

Page: 76 / 116

SAUTER DIESEL PRESSURE SWITCH
The burner is equipped with a safety pressure switch on the diesel
return circuit. It is installed in series to the air pressure switch and
is enabled only during diesel operation. It intervenes if it detects an
increasing diesel pressure equal to the preset value (5 bar).
Every time it occurs, the pressure switch opens its contact simulating
an overpressure of the liquid fuel, determining the lock-out of the fla -
me control equipment and therefore of the burner.
NOZZLES FLUIDICS ATOMIZER 12 N2 45°
For diesel operation use nozzles FLUIDICS Atomizer 12 N2 45°.
The diagrams represent the curves showing the values of the fuel
flow rate delivered by the nozzles depending on the return pressure.
The curves were obtained by considering a diesel pump regulating
pressure of 25 bar.
Return pressure value is detected on the pressure gauge (3) with
0-40 bar scale.
NOZZLE DIAGRAM FLUIDICS
(X)
bar
(Y)
Kg/h
0
100
200
300
400
500
600
700
2,5 4,5 6,5 8,5 10,5 12,5 14,5 16,5 18,5
260
450
500
330
700
Fluid_260_330_450_500
(X) Nozzle return pressure (bar)
(Y) Liquid fuel flow rate (kg/h)
18 / 56
0006160357_202106
ENGLISH