baltur BTL 14P, Installation, Use And Maintenance Instruction

Page: 56 / 64

MAINTENANCE TIME
Part description Action to be performed Diesel
COMBUSTION HEAD
IGNITION PILOT VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTAN-
CE, CHECK ELECTRICAL CONNECTION
YEARLY
ELECTRODES VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTAN-
CE, CHECK ELECTRICAL CONNECTION
YEARLY
FLAME DISC INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY
COMBUSTION HEAD COMPONENTS INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY
LIQUID FUEL NOZZLE CHECKING AND REPLACING, IF NECESSARY, SOLENOID VALVES AND SEALING RINGS,
CLEANING ORIFICE AND SWIRLER
YEARLY
INSULATING GASKET SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY
AIR LINE
AIR GRILLE/DAMPERS CLEANING YEAR
AIR DAMPER BEARINGS GREASING, (Note: apply only on burners with bearings requiring lubrication) YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR
AIR PRESSURE SWITCH CLEANING YEAR
AIR PRESSURE PORT AND PIPES CLEANING YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR
VARIOUS COMPONENTS
MECHANICAL CAM CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND SCREWS YEAR
LEVERS/TIE-RODS/BALL JOINTS CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR
COMBUSTION HEAD EXTRACTION
KIT
CHECKING WEAR AND OPERATION YEAR
FUEL LINE
HOSES REPLACEMENT 5 YEARS
PUMP FILTER CLEANING YEAR
LINE FILTER FILTERING ELEMENT CLEANING / REPLACEMENT YEAR
COMBUSTION PARAMETERS
CO CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
CO2 CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
BACHARACH SMOKE INDEX CON-
TROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
NOX CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
SMOKE TEMPERATURE CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
LIQUID FUEL DELIVERY/RETURN
PRESSURE CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
PRESSURE REGULATOR PRESSURE MEASURED AT START-UP YEAR
IMPORTANT
In case of heavy-duty operation or when using special fuels, the maintenance intervals must be reduced adapting them to the real
operating conditions, according to the indications of the maintenance technician.
24 / 30
0006080890_202211
ENGLISH