baltur BTG 3,6P, Installation, Use And Maintenance Instruction Manual

Page: 55 / 64

MAINTENANCE
Analyse combustion gases and check that the emission values
are correct at least once a year, in compliance with current law.
Carry out the following operations at the end of the heating sea -
son:
• Clean air dampers, the air pressure switch with pressure port
and the relevant pipe (if fitted).
• Check the electrode condition. Replace them, if necessary.
• Clean the photocell. Replace it, if necessary.
• Have the burner and the chimney cleaned by specialised per -
sonnel (stove repairer); a clean burner is more efficient, lasts
longer and is quieter.
• Check that the fuel filter is clean. Replace it, if necessary.
• Check that all components of the combustion head are in good
condition, have not been deformed and are free from deposi -
ts deriving from the installation environment and/or from poor
combustion.
• Analyse combustion gases and check emissions values.
ENGLISH
23 / 30
0006080763_201611