baltur 67200010, Installation, Use And Maintenance Instruction Manual

Page: 46 / 60

ENGLISH
16 / 28
0006081514_201711
The triggering (opening of the circuit) of any of the pressure switches
when the burner is running (flame on) causes the burner to stop
immediately.
It is essential to check that the burner is functioning correctly at the
time of the first ignition.
This test should also be performed with the burner already on.
The control box should lock out immediately when the connector is
disconnected.
• Check that the flame detector (ionisation electrode) disconnects
the ionisation cable and activate the burner.
• Check for the efficiency of the thermostats or boiler pressure
switches (they should shut down the burner when triggered).
0002939600
1
2
3
4
5 6
Display_BT320
1 Main ON/OFF switch
2 Thermostatic line switch
3 BT 320 Display
4 Equipment lock-out warning light
5 Voltage presence warning light
6 Fan lock-out, if foreseen