baltur 35575410, Instruction Manual For Installation, Use And Maintenance

Page: 66 / 84

DIAGRAM FOR REGULATING THE ELECTRODE DISK DISTANCE
After having installed the nozzle, check the correct position
of the electrodes and disk according to the following values,
indicated in millimetres.
After each operation on the head, make sure to comply with
the indicated values.
DANGER / ATTENTION
To prevent damage to the support, carry out nozzle
assembly and disassembly tasks with the aid of a
wrench and counter-wrench.
TBL 18P DANFOSS B 60° 3,00 GPH
TBL 18P DANFOSS B 60° 4,50 GPH
TBL 26P DANFOSS B 60° 4,00 GPH
TBL 26P DANFOSS B 60° 2,50 GPH
TBL 35P / P DACA DANFOSS B 60° 4,00 GPH
TBL 35P / P DACA DANFOSS B 60° 2,50 GPH
DANGER / ATTENTION
For narrow combustion chambers, it is recommended
to use nozzles with a 45° atomisation angle.
A B C D E
TBL 18P 1 19 5 4,5 7
TBL 26P 1 19 5 4,5 7
35P / P DACA 1,5 7 4 6,5 -
* After any operation on the combustion head, check the
connection of the extensions on the electrodes.
1 - Diffuser
2 - Flame disc
3 - Nozzle holder sleeve
4 - Ignition electrode
5 - Nozzle
D
A
B
C
A
B
D
E
C
E
TBL 18P
TBL 26P
0002930150
B
A
C
E
D
TBL 35P / P DACA
24 / 40
0006160435_202112
ENGLISH