This product is a circulator, designed for circulating the air in a room. Where dust has built up
on and around the guard, this may decrease the effectiveness of the fan. Where continuous
usage is intended, maintenance, as detailed below, should be carried out on a roughly
bi-weekly basis.
* When removing the Fan Guard for maintenance etc., make sure to disconnect the AC
adapter from the power outlet.
When cleaning, be sure to wear heavy-duty gloves.
In the case of continuous usage over a period of time, maintenance
should be carried out once every two weeks.
Maintenance
▲
Slide the lock from the “LOCK” position to the
“OPEN” position.
Carry out the process in the order of:
(1) [Depress the Guard Lock Lever]
→
(2) [Remove the Fan Guard]
Remove from
below with the
two catches
as pivots
1
2
Fan Guard
▲
Remove the Fan Guard by disengaging it from the catch from beneath while the Guard Lock Lever remains
depressed.
Note
(1) Lift the “Operating Lever”
(2) Set the “Slide Lock” to “OPEN” and
release the lock.
This product has an “Open-Shut Sensor” that detects whether the Fan Guard is attached or not.
If you attempt to remove the Fan Guard while the fan is in operation, a single electronic “beep”
sound will be issued and the power will turn OFF.
While continuing
to press down,
remove the Fan
Guard
Guard Lock Lever
English
13
Always set to the
“LOCK” position
when using the
product
Slide Lock
Operating Lever
