4
Installation Overview
CAUTION & WARNING:
Batteries are hazardous devices. Please follow
battery manufacturer’s recommendations for health and safety. Use only
the appropriate tools in conjunction with manufacturer’s instructions.
Isolate both battery and AC power supplies before attempting installation.
CAUTION & WARNING:
The Installation Overview does not refer
to each and every Caution & Warning Statement in this manual.
Be sure to observe safe working practices at all times. Refer to the
full manual if you are unsure of any practices that may damage
the SG200 Battery Monitor unit, your system wiring or health.
The SG200 is designed to monitor a battery or battery bank which is used in
deep cycling applications. It relies on the battery being discharged and then
charged to learn the battery’s characteristics. This learning process may never
occur on a start-only battery, since it is never cycled. However, The SG200
does have two additional leads to connect to starting batteries to read voltage
only.
SG200 Display
SmartShunt
SmartShunt
Positive )
Cable (To Negative Buss Bar)
BA
TT
(-)
SmartLink Cable
Fuse
Auxiliary/Starter
Battery
(Aux-1)
+
-
Voltage Only
Voltage Only
BA
TT
(-)
House Bank
+
-
Auxiliary/Starter
Battery
(Aux-2)
+
-
Fuse
Note: Negative Leads to Aux. Batteries are
Only Needed on Isolated Ground Systems.
Fuse
Summary of Contents for SG200
Page 1: ...SG200 BATTERY MONITOR Installation Operation Manual SUP 0250 REV A...
Page 34: ...34 NOTES...
Page 35: ...35 NOTES...
Page 36: ......