Ballymore PLD PLUS, Instruction Handbook Manual

Page: 12 / 16

21 Check if correct fuses are used, if necessary replace.
•
22 Test the audio warning signal
•
23 Check the contactors
•
24 Check the frame leakage (insulation test)
•
25 Check function and wear of the accelerator
•
26 Check the electrical system of the drive motor
•
Braking system
27 Check brake performance, if necessary replace the brake disc or adjust the air gap
•
Battery
28 Check the battery voltage
•
29 Clean and grease the terminals and check for corrosion and damage
•
30 Check the battery housing for damages
•
Charger
31 Check the main power cable for damages
•
32 Check the start-up protection during charging
•
Function
33 Test the audio warning signal
•
34 Check the air gap of the electromagnetic brake
•
35 Test the emergency brake
•
36 Test the reverse and regenerative braking
•
37 Test the safety (belly) button function
•
38 Check the steering function
•
39 Check the lifting and lowering function
•
40 Check the tiller arm switch function
•
41 Test the keypad for damages and function
•
42 Test the speed limitation switch (lifting height >~12in)
•
General
43 Check if all decals are legible and complete
•
44 Check if the protective screen and or guarding is not damaged
•
45 Inspect the castor, adjust the height or replace it, if worn out
•
46 Carry out a test run
•