1.8 Quickstart
31
During an explicit firmware update, the firmware file from inside the driver will be downloaded onto the device. In
order to become active the device must be power-cycled:
Firmware file will be downloaded during an firmware update...
When then re-attaching the device to the host system, the new firmware version will become active:
... after power-cycling the device it will be active
• The current firmware version of the device can be obtained either by using one of the applications which
are part of the SDK such as
mvDeviceConfigure
(p.
) or by reading the value of the property
Device/
←
-
FirmwareVersion
or
Info/FirmwareVersion
using the API
• The current FPGA file version used by the device can be obtained by reading the value of the property
Info/Camera/SensorFPGAVersion
Using wxPropView the same information is available as indicated by the following figure:
MATRIX VISION GmbH
Summary of Contents for MATRIX VISION mvBlueFOX Series
