1.19 Appendix A. Specific Camera / Sensor Data
205
FPS_max =
1
------------------------
ExposureTime
1.19.2.3.2.2
Snapshot mode
In snapshot mode, the image acquisition process consists off several sequential phases:
1.19.2.3.2.3
Trigger
Snapshot mode starts with a trigger. This can be either a hardware or a software signal.
The following trigger modes are available:
Mode
Description
Continuous
Free running, no external trigger signal needed.
OnLowLevel
As long as trigger signal is
Low
camera acquires images with own timing.
OnHighLevel
As long as trigger signal is
High
camera acquires images with own timing.
See also
Using external trigger with CMOS sensors
(p.
1.19.2.3.2.4
Erase, exposure and readout
All pixels are light sensitive at the same period of time. The whole pixel core is reset simultaneously and after the
exposure time all pixel values are sampled together on the storage node inside each pixel. The pixel core is read
out line-by-line after exposure.
MATRIX VISION GmbH
Summary of Contents for MATRIX VISION mvBlueFOX Series
