Balluff Easy Tool-ID 2.0, Configuration Manual

Page: 29 / 46

www.balluff.com 5 english
1.1 Validity
This manual describes the operating software for
Easy Tool-ID 2.0.
1.2 Symbols and conventions
Instructions are indicated by a preceding triangle. The
result of an action is indicated by an arrow.
►
Instruction 1
⇒
Result
Action sequences are numbered consecutively:
1.
Instruction 1
2. Instruction 2
Buttons or selectable menu entries are described in small
caps, e.g. S
ave
.
Note, tip
This symbol indicates general notes.
1.3 System requirements
– Compatible with Windows 7 or higher and Linux
– Ethernet/RJ45 connection or corresponding adapter
for USB
– Browser: Google Chrome (75 or higher), Mozilla Firefox
(68.0.1 or higher), Internet Explorer (10 or higher)
– Screen resolution of at least 1024 × 768 pixels
By default the device is set to DHCP server mode with
IP address 192.168.10.1.
NOTICE
Network disturbance
A network failure can occur when Easy Tool-ID is
connected to a network while in DHCP server mode.
►
Always adapt the network settings of the Easy
Tool-ID device to your company network before
connecting it.
For network settings see chapter 7.4.2 on
page 21.
1.4 Using Open Source Software
This product contains open source software. Information
can be found directly on the device under
Info > Open Source licenses or at
http://<DEVICE_IP>:9003 .
Fig. 1-1: Open Source Licenses
1.5 Written offer
This product contains software components that are
licensed by the copyright holders as Free Software or
Open Source Software under the GNU General Public
License, version 2, or the GNU Lesser General Public
License, version 2.1. You may receive the source code of
these software components from Balluff GmbH on a data
carrier of our choice, if you submit a request within three
years after shipping of the product (delivery made by
Balluff GmbH) to the following address:
Balluff GmbH
Open Source
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Please enter the following product data:
– Name of the product
– Serial number
– Delivery date
A fee will be charged, which is no higher than the cost of
physically performing source distribution.
1
Notes to the user
BSG TID-06-C05-02-005
Easy Tool-ID 2.0