3
SAFETY
8
www. matrix-vision.com
BVS SC-_1280Z00-70-000
SMART
CAMERA
IO
www.balluff.com
The working principle used in this
SMARTCAMERA
is maintenance- and wear-free. The
operator must regularly inspect the
SMARTCAMERA
for signs of damage or malfunc-
tions in line with the operating conditions and environmental influences. If any damage or
wear is found, the
SMARTCAMERA
must be immediately taken out of operation and
secured against unauthorized use.
Only service technicians from Balluff GmbH may repair defective devices. Intervention in
the product by the operator is not permitted due to safety reasons. The
SMARTCAM-
ERA
's
housing may not be opened or loosened!
WARNING
Before maintenance, disconnect the device from the power supply.
NOTE
In the interests of product improvement, Balluff GmbH reserves
the right to change the technical data of the product and the con-
tent of this manual at any time without notice.
3.3 Disposal
Observe the national regulations for disposal.
3.2.4 Maintenance, in-
spection, repair
