BTL5-T110...
Configuration and Profibus Connection –
Transducer Class 3/4
17
english
6
Startup
6.1
Sources
The following examples are also
available as a completed S7
project from Balluff
([email protected]).
6.2
Programming cyclic
transmission (DP-V0)
6.2.1 Configuring STEP7
Software
Startup of the transducer is shown
using the following example of the
configuration tool STEP7 (V5.3 +
SP2) and the 412-1 CPU (with
integrated Profibus interface).
6.2.2 Installing the GSD file
To be able to use the BTL5-T in the
Step7 hardware configurator, the
GSD file must be imported into the
system from 'Options' -> 'Install
GSD file'. When updating the GSD
file be sure that the file is not
currently being used by an
application, since otherwise the
system cannot exchange the file.
➥
➥
➥
➥
➥
Fig. 6-1
Fig. 6-1: Installing a new GSD file and updating the catalog contents
Fig. 6-2: Adding BTL5-T to the network using drag&drop
6.2.3 Configuring the transducer
After importing, the BTL5-T will be
in the hardware catalog under:
PROFIBUS-DP\Additional Field
Devices\Encoder\Linear\Absolute\
BTL5-T110.
➥
➥
➥
➥
➥
Fig. 6-2
