SELECT
RUN
MODE
SELECT
RUN
MODE
H
SELECT
RUN
MODE
SELECT
RUN
MODE
SELECT
RUN
MODE
H
H
Note
Setting hysteresis value less than required may cause chattering
due to external lights, noise etc.
Off operation level can be changed with On operation level fixed.
Hysteresis = On operation level - Off operation level
Hysteresis changeover ranges 1 to 99.
00 is impossible to be set. This results in "out of range".
Min. hysteresis value set on teaching mode is "4".
1) Turn the switch to SELECT.
2) Push button 1 and select "H". Turn the switch to MODE.
3) The flashing digit is possible to be changed.
- Push button 2 to shift digit.
- Push button 1 to count up the flashing figure.
4) Replace the switch to RUN after setting is completed.
"H" Hysteresis selection
(Function)
BOS 73
BOS 73
24
