Balluff BOS 73 K Series, Instruction Manual, Page: 52 / 62

SELECT
RUN
MODE
SELECT
RUN MODE
S
SELECT
RUN MODE
SELECT
RUN
MODE
"S" Manual setting for operation level/sensitivity
Check if the light indication is in "+/-" or in numerals "1, 2, .....8".
The procedure differs depending on which indication appears.
In numerals (1, 2, ... 8)
(Light level indication)
1) Turn the switch to SELECT to show SELE.
2) Push button 1 and select S. Turn the switch to MODE.
3) A figure of electronic volume flashes.
Ex. Electronic volume is positioned
on 8 and the incoming light level at
that moment is 348.
The display shows the incoming light level at that moment.
4) Push button 2 to shift flashing digit.
The flashing figure on the
light level display shows
On-operation level value.
(The illustration shows On-operation
level is 147.)
(Function)
BOS 73
21