Balluff BAE SA-OH-061-UA-DP02, User Manual

Page: 41 / 48

www.balluff.com 17 english
7.6 Configuration
* Factory defaults
(*3) ..-DP02, -S75G-SA3
7.6.1 Input Mode
The function of the pin can be selected with Mode.
Value Meaning
Off The pin has no function.
Teach-In The pin works as a digital teach input.
En.Emitter The pin works as a digital input to enable
the transmit LED.
DisEmitter The pin works as a digital input to disable
the transmit LED.
Tab. 7-6: Configuration – Input Mode
CONFIG CON Configuration of Operation Modes
PowerMode POW High, Std*, Low, Xlow
SpeedMode SPE Max. Switching Frequency
Standard* STSP Standard 1000 Hz
Fast
FASP Fast 4 kHz
Superfast SFSP Superfast 8 kHz
Sync 7
SYN7 Sync 7 500 Hz
Precision PRSP Precision 125 Hz
High Pr 25 H2SP High Precision 25 Hz
High Pr 30 H3SP High Precision 30 Hz
SyncMode SYN Auto, Master, Slave, Off*
InputConf (*3) INP Input Configuration
Inp Type TYP PNP*, NPN
Inp Mode MOD Off*, Teach-In, En.Emitter, DisEmitter
7
Menu structure (continued)
7.6.2 Input Type
The input can be configured with Type.
Value Meaning Description
PNP PNP PNP input
NPN NPN NPN input
Tab. 7-7: Configuration – Input Type
7.6.3 Power Mode
The power mode “High” should only be used if the high
power is really needed in order to avoid unnecessary high
current consumption and heating of the BAE. The modes
“Low” and “Extra Low” are mainly intended for transmitted
light barriers with short distance between transmitter and
receiver.
The LED pulse peak current depends on the speed mode:
Value Meaning
Standard,
Sync7,
Precision,
High Precision 25 Hz
High Precision 30 Hz
Fast
Super-
fast
High High 180mA 90mA 60mA
Std Standard 100mA 50mA 33mA
Low Low 55mA 27mA 18mA
Xlow Extra Low 18mA 18mA 18mA
Tab. 7-8: Configuration – Power Mode
BAE SA-OH-061-UA-... / BAE SA-OH-062-IC-...
Photoelectric Sensors