Balluff BAE SA-OH-061-UA-DP02, User Manual

Page: 29 / 48

www.balluff.com 5 english
1.1 Validity
This guide provides important information for the installa-
tion and connection of the amplifier series BAE SA-OH-
061 and BAE SA-OH-62 with a voltage (061) or current
(062) interface.
This guide applies to the following amplifier versions:
– BAE SA-OH-061-UA-DP02
Order code: BAE011Y
– BAE SA-OH-061-UA-S75G
Order code: BAE011U
– BAE SA-OH-061-UA-S75G-SA3
Order code: BAE011W
– BAE SA-OH-062-IC-DP02
Order code: BAE0122
– BAE SA-OH-062-IC-S75G
Order code: BAE0120
– BAE SA-OH-062-IC-S75G-SA3
Order code: BAE0121
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User’s Guide
This guide was created in German. Other language versi-
ons are translations of this guide.
© Copyright 2022, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the fol-
lowing documents:
– Data sheet
– Declaration of conformity
– Disposal
– Assembly instructions
1.3 Symbols and conventions
Individual action instructions are indicated by a preceding
triangle.
►
Instruction 1
Action sequences
are numbered consecutively:
1.
Instruction 1
2.
Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.4 Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
►
Measures to avoid hazards
The individual signal words mean:
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries
.
DANGER
The general warning symbol in conjunction with the si-
gnal word DANGER identifies a hazard which, if not avo-
ided, will certainly result in death or serious injuries .
1.5 Technical terms and abbreviations used
SP Setpoint
TP Teach point
1
About this guide
BAE SA-OH-061-UA-... / BAE SA-OH-062-IC-...
Photoelectric Sensors