Balluff BAE SA-OH-061-UA-DP02, User Manual

Page: 45 / 48

www.balluff.com 21 english
The specifications are typical values for 24 V DC at room
temperature.
The signal amplifier is fully operational immediately, with full
accuracy after warm-up.
Further data can be found at
www.balluff.com
on the product page.
9.1 General feature
Usage category DC13
9.2 Ambient conditions
Ambient temperature -5...+55 °C
Storage temperature -5...+55 °C
Protection per IEC 60529 (when
threaded together)
IP54
9.3 Electrical data
Operating voltage 15…30 V DC
Rated operating voltage Ue 24 V DC
No-load current I
0
at U
e
≤ 45 mA
Rated insulation voltage Ui 75 V DC
Max. load capacity at U
e
-061-UA
Speed Mode "Standard"
Speed Mode "Superfast"
47 nF
10 nF
-062-IC
Speed Mode "Standard"
Speed Mode "Superfast"
100 nF
10 nF
Max. Switching frequency
Speed Mode "Standard"
Speed Mode "Superfast"
1 kHz
8 kHz
Short circuit protection yes
Protection against miswiring yes
Polarity reversal protected yes
9.4 Electrical connection
Connection Plug, M8x1
Cable, 2m
Number of pins 4 (Plug)
5 (Cable)
9.5 Output / Interface
Output pin 4 / black Analog output
Analog output 4..20 mA (-062-IC)
0..10 V (-061-UA)
Input pin 2 / white Analog GND (S75G, DP02) /
digital input (S75G-SA3)
Digital input
(switchable)
PNP/NPN (S75G-SA3)
Cable version (DP02):
pink strand Digital input
Digital input
(switchable)
PNP/NPN
9.6 Materials
Housing material PC, PA 12
Contacts Gold-plated
Heat dissipation plate AlMg3
9.7 Mechanical features
Installation 2 × screw M3
DIN rail 35mm
DIN rail 15mm
Dimensions (W × H × L) 12.0 x 80.5 x 40.1 mm
9.8 Approvals and designations
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
Additional information on directives, approvals and
standards can be found at www.balluff.com on
the product page.
9
Technical data
BAE SA-OH-061-UA-... / BAE SA-OH-062-IC-...
Photoelectric Sensors