FOOT INSTRUCTIONS
Wall-mounted
bracket
Before using this heater,it must either be wall mounted or have the feet fi�ed.The device
has provided special screw knobs for moun�ng the feet, which can be installed manually
without using a screwdriver.
1. Make sure the heater is unplugged and power switches are off
2. Carefully turn the main body upside-down on a scratch-free and stable surface. Be
careful to prevent damage to the cosme�c finish or your floor surfacing.
Note:The wall bracket edges may be sharp.It is recommended that if using as a free
standing appliance please remove the wall bracket from the back of the heater
Before you install:
Remove the foot and
thumb screws from the
foam on the side of the
product package
Align the foot with the
groove on the bo�om
of the main body and
turn the included thumb
screw to fix it as firmly
as possible.
04
