Ballu NCA15-EF3.0 Product Instruction Manual Download Page 15

TROUBLESHOOTING

7. What is the difference between Ballu convec�on heater and air condi�oner ?

A: The air condi�oner will cause the indoor air to flow sharply, which will make people feel dry and lack

of oxygen, and because the installa�on posi�on of the air condi�oner is high, it will cause the experience

of hot head and cold feet. In addi�on, the air exchange principle of the air condi�oner determines its

hea�ng effect. When the outdoor temperature is very low, the air condi�oner loses its hea�ng effect.

The ballu convec�on heater is based on the physical principle of hot air rising and cold air falling to

achieve natural air convec�on without direct blowing, and can make the temperature of the upper and

lower posi�ons of the room the same, and the hea�ng feels very comfortable.

8. How to save on electricity bills ?

A: Power consump�on depends on the size of the room, the insula�on of the room, and the temperature

you expect.It is recommended to use in a space of 160-220 square feet (Can be used up to 300 square

feet, but requires longer hea�ng �me), close doors and windows to reduce heat loss, and adjust the

heater to the highest temperature and power for faster hea�ng. When the room enters the thermal

insula�on state, the temperature will be stable, and the power consump�on per hour will be reduced.

At this �me, a lower temperature value can be set.You can also save on electricity bills with different

mode temperatures, which are used at different �mes of the day and in different situa�ons.

13

Summary of Contents for NCA15-EF3.0



















Reviews: