Ballu KFR-2501G/Y2BPE, Service Manual

Page: 7 / 70

Remote Control Unit
AUTO
S E T T E M P
C
AUTO
HOUR
ON
OFF
ON/OFF
TEMP
HIGH
POWER
FLAP
ON OFF
SET CANCEL
A/C SENSOR
BATTERY
FAN SPEED
MODE
Sensor
Detecting the ambient temperature
of the remote controller
LCD
Indicating the operation
1-hour timer
Hi-Power Operation.Button
Vertical Air-flow
(Up-down and left-right adjustments)
Timer on
A/C sensor Button
Press the button if the remote controller
could be adversey affected by a heat
resource, such as an eletric blanket,
radiator or sunlight, This will set the
sensor in the indoor unit to monitor
the temperature in the room. The symbol
will appear on the LCD.
Transmitter
Transmitting signals to the indoor unit
On/Off Button
Turn the appliance on and off by
pressing the button consecutively.
Temperature Setting
Press the button marked " "or " "
to increase or decrease the temperature.
Mode Selection Button
Auto Heating Dehumidification
Fan Cooling
Fan Speed Selection Button
Reset
Press the button after batteries are
loaded and indication appears on LCD.
Sliding Cover
Battery Compartment
6
1HOUR
A
AUTO
1HR
SOFT SLEEP
ACL
Timer off
Timer Setting
Sleep Mode Selection Button
Timer Inactivation Button
Energy-saving Button
REMARK: The remote controller transmits signal to indoor unit at 3 minutes intervals. If the indoor unit has not received the signal for
more than 10 minutes due to remote controller missing or other reason, the sensor on indoor unit will be used for detecting
indoor temperature automatically. Here, ambient temperature of remote controller is likely to slightly different from that
detecting by the indoor unit, temperature will be compensated automatically. when the remote controller is missing or the
batteries are exhausted, please use the temporary switch.
1. PART NAMES AND FUNCTIONS